1. Advantages of coating film: The relative molecular weight of the resin in the powder spraying equipment production line is larger than that of the solvent-based coating resin, so that the physical and mechanical properties and chemical resistance of the coating film are better than those of the solvent-based coating. The specific performance is its acid resistance , Alkali, salt corrosion is better, high adhesion.
2. Cost saving: more than 95% of the sprayed powder can be recycled; the powder spraying equipment production line has no sag, and the cleaning is simple; no solvent, no viscosity adjustment, no leveling time; can control the scrap rate at a low state, after spraying If the surface coating of the workpiece before entering the curing furnace is unqualified, the powder can be blown off and re-sprayed for deep coating.
3. The ease of use of the powder coating equipment production line: the powder coating is stable in storage at room temperature. It does not need to adjust the viscosity with the seasons like solvent-based coatings, nor does it need to be placed for a period of time after spraying to allow the solvent to evaporate before drying. . Only need to heat, bake, melt and solidify to form a smooth and bright coating film to achieve the purpose of decoration and anti-corrosion.
4. Convenient application: The production line of powder spraying equipment can provide a variety of colors; the regularity of powder spraying performance and the coating of spraying make it unnecessary for operators to have too high technical level; with automatic wheel lift, it can be easily Automatic production can be achieved, coating can be completed at one time, and production time is shortened.
5. The powder coating equipment production line can achieve the desired effect! With the continuous development of the technology era, its equipment technology will become more and more mature, and it can be applied to more aspects and deeper levels in the future. For the knowledge of the use of such equipment, we must have a deep understanding of it, so as to make better use of it and give full play to the value of the equipment itself. In the process of using the sprayer, it is necessary to ensure a stable current flow, so that the spraying effect can achieve the desired effect.
